B2 - Schoonover, Inc.

Leak Detectors
Ecotec II Sniffer Leak Detector
Ecotec II Sniffer Leak Detector
For Refrigerant, SF6 and Other Gases
The Ecotec II is a sniffer leak detector, for highly selective detection
of refrigerants (R 134a, for example) and other gases. It may be
programmed for simultaneous detection of two different gases in
order to arrive at clear results even under critical conditions
(to clearly differentiate between the propellant of an insulating
foam and a refrigerant, for example).
Advantages
◆ 65 pre-programmed gases
◆ 40 freely definable gases
◆ Simultaneous detection of up to 4 gases
◆ Selective measurements on refrigerants
◆ Quasi-analog leak rate display through 45 LED segments and
with a digital exponent
◆ Background suppression
◆ Highly flexible and rugged sniffer lines up to 10 m long for individual
use and inaccessible test samples
◆ Sniffer tips with exchangeable filter made of felt, and additional
sinter filter
Typical Applications
The Ecotec II is used to test for leaks on soldered/welded joints and
screwed connections which are exposed to pressures, for example in
production lines for:
◆ Refrigerators and deep freezers
◆ Compressors and evaporators
◆ Cooling and refrigeration systems
◆ Air conditioning units (automotive industry)
◆ Refrigerant vehicles
◆ Halogen lamps
◆ High tension switches
◆ Audio alarm (variable volume)
◆ Multi-line display for leak rates (digital) and status error messages
◆ Autoranging
◆ Easy to operate
◆ Fast response, quick testing
◆ Reproducible test results
◆ Highly reliable
◆ Protected against misoperation
◆ Mobile
◆ Long periods between maintenance through an oil-free vacuum system
without any valves
B5.24