B2 - Schoonover, Inc.

Electrical Feedthroughs
Vacuum Feedthroughs
Electrical Feedthroughs
16 ISO-KF
Technical Data
Vacuum connection DN 16 ISO-KF DN 16 ISO-KF DN 16 ISO-KF
Number of feedthroughs 4 9 9
Voltage per pole 1) V 50 50 50
Current per pole 1) A 1 2 2
Ordering Information
Feedthrough 214-111 214-112 214-113
Connector: vacuum side Ñ Ñ 214-191
Connector: air side 214-171 214-172 214-172
Connection
Vacuum side solder connection solder connection connector
Air side connector connector connector
Diameter of connecting wire mm 0.6 1.2 1.2
Test voltage V / Hz 500 / 50 500 / 50 500 / 50
Tightness mbar l/s 1 x 10 -9 1 x 10 -9 1 x 10 -9
Pressure (absolute) 2) 1 x 10 -8 mbar Ð 2.5 bar 1 x 10 -8 mbar Ð 2.5 mbar 1 x 10 -8 mbar Ð 2.5 mbar
Bakeout temp. (feedthrough, connector) ¡C 130 130 130
Housing nickel-plated steel nickel-plated steel nickel-plated steel
Insulator PEEK / Araldit PEEK / Araldit PEEK / Araldit
Seal FPM FPM FPM
Contact (feedthrough, connector) gold-plated bronze gold-plated bronze gold-plated bronze
1) Local regulations concerning use must be followed
2) Pressure max. 10 bar with external centering ring
B7
Connector: vacuum side
Feedthrough
Connector: air side
B7.11