B2 - Schoonover, Inc.

Leak Detectors
LDS 1000 Modular Leak Detection System
LDS 1000 Modular Leak Detection System
For Integration in Industrial
Leak Testing Systems
The LDS 1000 is a helium leak detector for universal integration in
industrial leak testing systems (vacuum or sniffing method).
The detection system has been separated from the power supply
electronics so that the LDS 1000 may be adapted to the particular
application with great flexibility.
Advantages
◆ Fast response time for short testing cycles
◆ Measurement of the true leak rate of the test sample while
simultaneously pumping down the test chamber (partial flow operation)
◆ Control and acquisition of data via programmable control compatible
signals or RS 232 C interface
◆ Easy to operate
Typical Applications
Leak tests in the areas of:
◆ Mechanical engineering
◆ Manufacture of systems
◆ Automotive industry
◆ Lamps and tube production
◆ Switching over from vacuum leak detection to sniffer leak detection
upon a single key press allows for immediate pin-pointing of the leak
during the same test step
◆ The operating unit may also be detached from the instrument
◆ Control and data acquisition software LDS-WARE (optional)
◆ Chart recorder output 0 - 10 V lin/log for logging the leak rate and the
forevacuum pressure
◆ Calibration through internal calibrated leak Ñ also externally or
dynamically while pumping down is in progress
◆ Electronics module prepared for mounting in a 19" rack (3 HU) to offer
protection against dust, high temperatures or electromagnetic interference
330
Dimensional drawing of the LDS 1000
210
135
115
170
190
128.5
483
320
380
Dimensional drawing of the electronics module for the LDS 1000
B5.16