B2 - Schoonover, Inc.
B2 - Schoonover, Inc.
B2 - Schoonover, Inc.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
IC/5 Thin Film Deposition Controller<br />
Thin Film Deposition Controllers and Monitors<br />
Ordering Information<br />
Sensor module<br />
Plug-in module for simultaneous connection of two sensors via sockets on the rear of the unit.<br />
Up to four such modules (for 8 sensors) may be installed in the IC/5.<br />
Microbalance module<br />
Plug-in module for simultaneous connection of two sensors via sockets on the rear of the unit. <strong>Inc</strong>orporates<br />
a highly stable reference oscillator. Up to four such modules (for 8 sensors) may be installed in the IC/5.<br />
IEEE488 computer communications module<br />
Plug-in module for operation in connection with standard industry protocols.<br />
I/O relay module<br />
Plug-in module with 8 programmable relay outputs and 14 TTL inputs. The IC/5 supports the operation<br />
of two I/O relay modules. One is included as standard with the base unit.<br />
TTL relay module<br />
Plug-in module with 8 programmable relay outputs and 14 TTL outputs.<br />
The IC/5 supports the operation of one TTL relay module.<br />
Disk drive kit<br />
Kit with a 3 1 /2", 1.44 Mb disk drive for storing process data and other data.<br />
Complete with all required hardware, cables and installation instructions for the IC/5.<br />
The IC/5 supports the operation of one disk drive.<br />
Replacement disk drive<br />
3 1 /2", 1.44 Mb disk drive for the IC/5. Only intended as a replacement for a disk drive already<br />
installed in the IC/5.<br />
Adapter kits<br />
Signal converter and cable kit for retrofitting an IC/5 to an already existing system, replacing:<br />
IC 6000 or<br />
IC/4 or IC/4 PLUS<br />
Adapter cable<br />
Cable kit for retrofitting an IC/5 to an already existing system, replacing:<br />
STC-200<br />
Others<br />
IC/5 offline software editor<br />
A software package for generating and editing of processes, for defining materials and the entry of all<br />
parameters for an IC/5 on a PC (DOS program, Windows compatible).<br />
IC/5 manual (one provided with each unit)<br />
Accessories and Spare Parts<br />
Part Number<br />
760-132-G1<br />
760-132-G2<br />
760-142-G2<br />
760-162-G1<br />
760-162-G2<br />
760-023-G2<br />
035-013<br />
600-1083-P1<br />
600-1084-P1<br />
600-1046-P1<br />
Contact Factory<br />
760-030-G1<br />
074-237<br />
B4<br />
B4.11
Change language