B2 - Schoonover, Inc.

Thin Film Deposition Controllers and Monitors
IC/5 Thin Film Deposition Controller
Ordering Information Code-No. IC/5 – ____ ____ ____ ____ ____ ____ ____ ____
Base unit
IC/5, 100 V, 50/60 Hz
IC/5, 120 V, 50/60 Hz
IC/5, 220 V, 50/60 Hz
IC/5, 240 V, 50/60 Hz
Sensor module (each module contains 2 sensor inputs)
1 standard module (included with the base unit)
2 standard modules
3 standard modules
4 standard modules
1 microbalance module (replaces standard module)
2 microbalance modules (replaces standard module)
3 microbalance modules (replaces standard module)
4 microbalance modules (replaces standard module)
Additional computer communications module
(RS232C is standard)
None
IEEE488 parallel
I/O relay module (8 relay outputs, 14 TTL inputs)
1 (included in the base unit)
2
Optional TTL relay module
(8 relay outputs, 14 TTL outputs)
None
1
Optional 3 1 /2" (1.44 Mb) disk drive
None
1
Optional offline editor software
None
One
Optional crystals
None
One box gold crystals (10 crystals/box)
Five boxes gold crystals (10 crystals/box)
Ten boxes gold crystals (10 crystals/box)
One box silver crystals (10 crystals/box)
Five boxes silver crystals (10 crystals/box)
Ten boxes silver crystals (10 crystals/box)
1
2
3
4
1
2
3
4
5
6
7
8
1
2
1
2
1
2
1
2
0
1
0
1
2
3
4
5
6
Note: A complete deposition system needs 5 components: a base unit, an oscillator package, a vacuum feedthrough, a crystal sensor and crystals.
In preexisting installations, only some of these components will be required.
B4.10