Introduction to Basic Manufacturing Processes and ... - always yours

182 Introduction to Basic Manufacturing Processes and Workshop Technology
3. It is strong
4. It has good resistance against sand abrasion
5. Good surface finish
Disadvantages
1 It is heavy
2 It is brittle and hence it can be easily broken
3 It may rust
Brasses and Bronzes
These are heavier and expensive than cast iron and hence are preferred for manufacturing
small castings. They possess good strength, machinability and resistance to corrosion and
wear. They can produce a better surface finish. Brass and bronze pattern is finding application
in making match plate pattern
Advantages
1. Better surface finish than cast iron.
2. Very thin sections can be easily casted.
Disadvantages
1. It is costly
2. It is heavier than cast iron.
Aluminum Alloys
Aluminum alloy patterns are more popular and best among all the metallic patterns
because of their high light ness, good surface finish, low melting point and good strength.
They also possesses good resistance to corrosion and abrasion by sand and there by enhancing
longer life of pattern. These materials do not withstand against rough handling. These have
poor repair ability and are preferred for making large castings.
Advantages
1. Aluminum alloys pattern does not rust.
2. They are easy to cast.
3. They are light in weight.
4. They can be easily machined.
Disadvantages
1. They can be damaged by sharp edges.
2. They are softer than brass and cast iron.
3. Their storing and transportation needs proper care.
White Metal (Alloy of Antimony, Copper and Lead)
Advantages
1. It is best material for lining and stripping plates.
2. It has low melting point around 260°C
3. It can be cast into narrow cavities.