GL900 USER'S MANUAL
GL900 USER'S MANUAL
GL900 USER'S MANUAL
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Checks and Preparation<br />
Connecting to a DC Power Supply<br />
Use the optional DC drive cable (B-514: option).<br />
CAUTION<br />
Use a power supply within the 8.5 to 24 VDC range.<br />
(1) Configure the tip of the DC drive cable (B-514: option, 2m) to enable it to be connected to the<br />
DC power supply.<br />
(2) Connect the DC output side to the power supply connector on the <strong>GL900</strong>.<br />
Shielded lead (- side)<br />
White (+ side)<br />
DC drive cable<br />
(B-514: option)<br />
(3) Using the flat-blade screwdriver, press against the minus (-) button above the GND terminal,<br />
while connecting the grounding cable to the <strong>GL900</strong>. Connect the other end of the cable to<br />
ground.<br />
(4) Connect the DC input side to the DC power supply.<br />
CAUTION<br />
Be sure to check the polarity of the wire tips when performing wiring.<br />
(5) Press the power switch on the <strong>GL900</strong> to the ON side to turn on the power.<br />
CAUTION<br />
Always connect the GND terminal and refer to the safety precautions. The <strong>GL900</strong> must be<br />
grounded even when connected to other devices and sharing a common ground level.<br />
2-5