GL900 USER'S MANUAL
GL900 USER'S MANUAL
GL900 USER'S MANUAL
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Settings and Measurement<br />
Switching displays<br />
Analog and Logic/Pulse can be switched as shown below.<br />
• Display Logic/Pulse Data<br />
A screen switches<br />
with ENTER key.<br />
• Display Analog Data<br />
Analog settings<br />
This screen allows you to set conditions for analog signals.<br />
CHECKPOINT<br />
ALL and Span All Settings are set only for the currently displayed group (per 10 channels).<br />
(1)-1 Input<br />
Selects input conditions.<br />
Selection<br />
Off<br />
Voltage<br />
Temperature<br />
Humidity<br />
Description<br />
Disables the measurement of input signals and the waveform and digital display.<br />
Used for measuring direct-current voltages.<br />
Used for measuring temperatures.<br />
Used for measuring humidity with humidity sensor B-530.<br />
This selection sets the voltage range to 1V and disables EU settings.<br />
(1)-2 Range<br />
Specifies the range of signal input to be measured.<br />
Input setting<br />
Selection<br />
Voltage 20, 50, 100, 200, 500mV; 1, 2, 5, 10, 20, 50, 100, 200, 500V; 1-5V<br />
Temperature TC-K, TC-J, TC-T, TC-R, TC-E, TC-B, TC-S, TC-N, TC-W,<br />
Humidity No selection<br />
3-18
Change language