GE863-QUAD / PY Software User Guide
GE863-QUAD / PY Software User Guide
GE863-QUAD / PY Software User Guide
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>GE863</strong>-<strong>QUAD</strong> / <strong>PY</strong> <strong>Software</strong> <strong>User</strong> <strong>Guide</strong><br />
1vv0300746 Rev. 1 - 23/10/06<br />
4.4 GPRS data state exit<br />
LCP Terminate Request<br />
LCP Terminate Acknowledge<br />
• Wait for NO CARRIER response.<br />
or alternatively:<br />
• send escape sequence:<br />
+++<br />
• wait for 2s ( default silence time)<br />
• wait for response:<br />
Response Reason Action<br />
OK<br />
Now <strong>GE863</strong>-<strong>QUAD</strong> / <strong>PY</strong> is in proceed ahead<br />
command mode<br />
ERROR some error occurred Check command syntax and<br />
timing and retry<br />
NO CARRIER Connection has been closed Proceed ahead<br />
• send command<br />
ATH<br />
• wait for response:<br />
Response Reason Action<br />
OK<br />
The GPRS connection has<br />
been closed<br />
ERROR some error occurred Check command syntax and<br />
retry<br />
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Right reserved page 107 of 117