GE863-QUAD / PY Software User Guide
GE863-QUAD / PY Software User Guide
GE863-QUAD / PY Software User Guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>GE863</strong>-<strong>QUAD</strong> / <strong>PY</strong> <strong>Software</strong> <strong>User</strong> <strong>Guide</strong><br />
1vv0300746 Rev. 1 - 23/10/06<br />
+CMS ERROR: 315 SIM is wrong type Check SIM, it must be a GSM<br />
SIM.<br />
+CME ERROR: 17<br />
PIN2 is required to continue Enable FD facility with +CLCK<br />
operations, since FD facility is (see par.3.1.1.2)<br />
not enabled.<br />
and retry.<br />
NOTE: After power up & PIN authentication the device reads all the SIM for a backup, hence<br />
SIM access is inhibited (SIM is busy after the issue of the PIN or after power up if PIN request<br />
is disabled) for a time varying from few seconds to about a minute, depending on the<br />
percentage of written records in the SIM phonebook. If Phonebook commands are issued<br />
during this time the device returns an error message. If this happens, retry the operations later.<br />
NOTE: Due to the particular features of the FD storage, when selecting the FD storage, the<br />
PIN2 must have been inserted or the FD facility must have been enabled.<br />
If +CPBS command reports +CME ERROR: 17 then enable the facility with command +CLCK<br />
(see par. 3.1.1.2)<br />
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Right reserved page 35 of 117