GE863-QUAD / PY Software User Guide
GE863-QUAD / PY Software User Guide
GE863-QUAD / PY Software User Guide
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>GE863</strong>-<strong>QUAD</strong> / <strong>PY</strong> <strong>Software</strong> <strong>User</strong> <strong>Guide</strong><br />
1vv0300746 Rev. 1 - 23/10/06<br />
+CMS ERROR: 42 network congestion Retry later<br />
+CMS ERROR: 96 Mandatory information missing Check for destination address<br />
in the SMS, overwrite it and<br />
retry.<br />
OK command aborted by user you issued a ESC char<br />
For example:<br />
1- Let's assume you want to directly send a new SMS to the destination address number<br />
+39338123456789. We suppose you already have set up the device for text SMS mode as described<br />
on the previous paragraphs:<br />
command:<br />
AT+CMGS="+39338123456789"<br />
response:<br />
><br />
now you can insert the message text in IRA format (note that the IRA format and ASCII format<br />
coincide for the alphabet characters but not for the other).<br />
…. here will be inserted the SMS message text to be sent….<br />
conclude text with the character CTRL-Z<br />
response:<br />
+CMGW: 4<br />
OK<br />
In this case, the new SMS was successfully sent to the SC and its network reference number is 4.<br />
Do not confuse message reference with message index position, the first indicates the network<br />
reference for identifying the sent message (the eventually requested status report will have the same<br />
reference) while the second indicates the position where the message has eventually been stored in<br />
memory.<br />
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Right reserved page 76 of 117