GE863-QUAD / PY Software User Guide

GE863-QUAD / PY Software User Guide
1vv0300746 Rev. 1 - 23/10/06
3.4.8 Listing a group of SMSs
The SMS can be grouped into 5 different groups depending on their status:
• REC UNREAD - received messages still not read
• REC READ - received messages already read
• STO UNSENT - written messages not yet sent
• STO SENT - written messages already sent
• ALL - all types of messages
It is possible to have the list of all the messages in one group:
• send command AT+CMGL=
where:
- status group of the message
"REC UNREAD" - new message
"REC READ" - read message
"STO UNSENT" - stored message not yet sent
"STO SENT" - stored message already sent
"ALL"
- all messages
• wait for response in the format:
For every message in the group:
+CMGL: ,, [,,,,]
where:
- message index position on the storage
- status of the message
"REC UNREAD" - new message
"REC READ" - read message
"STO UNSENT" - stored message not yet sent
"STO SENT" - stored message already sent
- sender number/destination number
< tooa/toda > - type of number
145 - international number (contains "+" character)
129 - national number
- length of the message text in characters
- message text
NOTE: If status of the message is 'received unread', status in the storage changes to 'received read'.
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Right reserved page 80 of 117