GE863-QUAD / PY Software User Guide

More documents

Recommendations

Info

GE863-QUAD / PY Software User Guide 1vv0300746 Rev. 1 - 23/10/06 3.6.2.3.1 Alarm operation example For example: 1- Let's assume you have a battery powered device, a meteorological unit that measures every hour the conditions and therefore needs to send a new SMS every hour to the central server, for example indicating the whether status just measured. Let say your application shall consume the absolute minimum power to achieve the job, since it will be placed in a remote position where its battery shall last as long as possible and therefore it should shutdown completely and wake up every hour for just the time needed to measure & send the whether, successively shutdown. - set up the time in the internal clock (only the first time..) command: AT+CCLK="02/11/07,12:24:30+01" response: OK - set up the next alarm in order to raise the GPIO6 pin to power up the controlling application too. command: AT+CALA="02/11/07,13:24:30+01",0,6,"TIME TO MEASURE & SMS…!" response: OK - shutdown the GE863-QUAD / PY and successively the controlling application. command: AT#SHDN response: OK … after an hour.. The GE863-QUAD / PY will turn itself ON in "Alarm Mode" and contemporarily both rise the GPIO6 pin which turns on the power to the controlling application and issue every 3s an unsolicited code +ALARM: TIME TO MEASURE & SMS…! - turn on the keep alive line in the controlling application that keeps itself ON. - stop the alarm activity in the GE863-QUAD / PY (recognized by the +ALARM unsolicited code) and bring the GE863-QUAD / PY in operating mode command: AT#WAKE=0 response: OK - take the whether measure - send the SMS with the whether data (see Sending a new SMS without storing it par. 3.4.5). - read the current time. command: AT+CCLK Reproduction forbidden without Telit Communications S.p.A. written authorization - All Right reserved page 94 of 117
esponse: +CCLK="02/11/07,13:24:47" OK GE863-QUAD / PY Software User Guide 1vv0300746 Rev. 1 - 23/10/06 - calculate & set up the next alarm in order to raise the GPIO6 pin to power up the controlling application too. command: AT+CALA="02/11/07,14:24:47+01",0,6,"TIME TO MEASURE & SMS…!" response: OK - shutdown the GE863-QUAD / PY and successively the controlling application. command: AT#SHDN response: OK Reproduction forbidden without Telit Communications S.p.A. written authorization - All Right reserved page 95 of 117
Page 1 and 2:
GE863-QUAD / PY Software User Guide
Page 3 and 4:
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
2.5.2.3 Provide SIM PIN (only if re
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
For example: 1 - Let's assume that
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
AT+CPBR=7 the response may look lik
Page 41 and 42:
3.1.5 Phonebook entry Delete As fir
Page 43 and 44: GE863-QUAD / PY Software User Guide
Page 45 and 46: 3.2.1.1 Set the extended incoming c
Page 61 and 62: • wait for OK GE863-QUAD / PY Sof
Page 63 and 64: - Data Coding Scheme - page number
Page 93: GE863-QUAD / PY Software User Guide
Page 99 and 100: 4.1.1 CSD application example GE863
Page 111 and 112: MAIL FROM: GE863-QUAD / PY Softwar
Page 117: GE863-QUAD / PY Software User Guide
show all

GE863-QUAD / PY Software User Guide

Create successful ePaper yourself

Delete template?

Save as template?