GE863-QUAD / PY Software User Guide

More documents

Recommendations

Info

GE863-QUAD / PY Software User Guide 1vv0300746 Rev. 1 - 23/10/06 TIP: The delete operation simply overwrites the record number with an empty record. If the record to be deleted was already empty, no error messages will be shown, but it will be only filled again with empty values. 3.1.6 Phonebook entry Dial You may want to dial a number previously stored in the phonebook. As first thing, you must find the desired phone number index position, to do it use the +CPBF command. Once the number is known set up the device for the type of call you want to dial. Then: • send command ATD> where: is the index number of the desired PB record to be dialed. wait for response according to the call type you issued. For example: 1- Let's assume you want to make a Voice call on the internal audio path MT to "Fabio" whose number is stored on the SIM PB: - Select the PB as active storage command: AT+CPBS="SM" response OK - Now find the index number where "Fabio" is recorded: command: AT+CPBF="Fabio" the response may look like: +CPBF= 7,"+39404192369",145,"Fabio" OK - the first field is the index position: 7 in this case. - Now set up Voice call: command: AT+FCLASS=8 response: OK AT#CAP=2 OK AT+CLVL=8 OK Reproduction forbidden without Telit Communications S.p.A. written authorization - All Right reserved page 42 of 117
GE863-QUAD / PY Software User Guide 1vv0300746 Rev. 1 - 23/10/06 AT+CMUT +CMUT: 0 - and Dial: ATD> 7 OK Reproduction forbidden without Telit Communications S.p.A. written authorization - All Right reserved page 43 of 117
Page 1 and 2: GE863-QUAD / PY Software User Guide
Page 17 and 18: 2.5.2.3 Provide SIM PIN (only if re
Page 25 and 26: For example: 1 - Let's assume that
Page 39 and 40: AT+CPBR=7 the response may look lik
Page 41: 3.1.5 Phonebook entry Delete As fir
Page 45 and 46: 3.2.1.1 Set the extended incoming c
Page 61 and 62: • wait for OK GE863-QUAD / PY Sof
Page 63 and 64: - Data Coding Scheme - page number
Page 93 and 94:
GE863-QUAD / PY Software User Guide
Page 95 and 96:
esponse: +CCLK="02/11/07,13:24:47"
Page 97 and 98:
Page 99 and 100:
4.1.1 CSD application example GE863
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
MAIL FROM: GE863-QUAD / PY Softwar
Page 113 and 114:
Page 115 and 116:
Page 117:
show all

GE863-QUAD / PY Software User Guide

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?