GE863-QUAD / PY Software User Guide

AT+CPBR=7
the response may look like:
+CPBR= 7,"+39404192369",145,"Fabio"
GE863-QUAD / PY Software User Guide
1vv0300746 Rev. 1 - 23/10/06
OK
- Now you might want to look for the entries at the positions from 7 to 9 and for example the position at
index 8 is empty
command:
AT+CPBR=7,9
the response may look like:
+CPBR= 7,"+39404192369",145,"Fabio"
+CPBR= 9,"0404192111",129,"Fabrizio"
OK
3.1.4 Phonebook entry Write
As first thing, you must select the desired storage as active (see par.3.1.1.1). Then:
• send command AT+CPBW=,,,
where:
is the index number of the desired PB record to be written (may be omitted if any
empty record number can be used).
is the phone number;
is the type of number:
145 – international numbering scheme (contains the character "+")
129 – national numbering scheme
is the alphanumeric name associated with the number.
• wait for response:
Response Reason Action
OK
Record has been successfully Proceed ahead
written
ERROR some error occurred Enable extended result codes
(see par. 2.5.2.1), and retry.
+CME ERROR: 10 SIM not present Check SIM or require SIM
insertion and repeat from par.
2.5.2.2
+CMS ERROR: 310 SIM not present Check SIM or require SIM
insertion and repeat from par.
2.5.2.2
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Right reserved page 39 of 117