GE863-QUAD / PY Software User Guide

GE863-QUAD / PY Software User Guide
1vv0300746 Rev. 1 - 23/10/06
3.1.2 Phonebook entry search by Name
As first thing, you must select the "SM" storage as active (see par.3.1.1.1).
• send command AT+CPBF=
where:
is the desired string to be found in the name field of the PB record.
• wait for response in the format:
+CPBF= ,"",,""
OK
where:
is the record number on the PB;
is the phone number;
is the type of number:
145 – international numbering scheme
129 – national numbering scheme
is the alphanumeric name associated with the number.
or in the case no corresponding entries are found:
+CME ERROR: 22 or simply ERROR.
NOTE: The search for string is not case sensitive and the string may or may not be
included in double brackets.
For example:
1- Let's assume you want to select the "SM" normal phonebook for operations,
command:
AT+CPBS="SM"
response
OK
- Now you might want to look for the entries with the name starting with: "FA"
command:
AT+CPBF="FA"
the response may look like:
+CPBF= 7,"+39404192369",145,"Fabio"
+CPBF= 9,"0404192111",129,"Fabrizio"
OK
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Right reserved page 37 of 117