GE863-QUAD / PY Software User Guide

GE863-QUAD / PY Software User Guide
1vv0300746 Rev. 1 - 23/10/06
- No Header on PDU
- Reply path not set
Hence, the message format is the binary number 00111001 corresponding to the integer 57.
- Validity period format is absolute, hence it represents the expiration date of the message and the
desired expiration date is for example 29/06/02 at 02:20 in the time zone of Italy (+1).
"29/06/02,02:20:00+1"
- Protocol ID implicit (SMS sent to a mobile terminal) corresponding to a value 0.
- Data Coding Scheme:
- Default Alphabet
- Class 0 (e.g. immediate display SMS)
Corresponding to the binary number 11110000 corresponding to the integer 240.
command:
AT+CSMP= 57,29/06/02,02:20:00+1,0,240
response:
OK
3.4.1.6 Select SMS Memory and check for memory space
There are various types of storage where the SMS can be stored, the Telit GE863-QUAD / PY
provides two different storage:
"ME" - mobile equipment memory
"SM" - SIM Card memory
The SMS are usually stored (this is true for both the originated and the received SMS) in the SM
storage, the "ME" storage is a read only one where the Class 0 messages received are stored
(regardless of the selected active storage which may be "SM").
For this reason the "ME" storage can be selected to read the Class 0 messages.
The GE863-QUAD / PY allows the user to select a different storage for the read-delete, write-send,
and reception-saving SMS operations.
• send command AT+CPMS=,,
where:
: memory storage for Read and Delete commands
- "SM"
- "ME" (No Delete operations allowed)
: memory storage for Write and Send commands
: memory storage for new incoming message saving
- "SM" only
• wait for response in the format:
+CPMS:,,,,,
OK
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Right reserved page 69 of 117