USAF ILA Handbook - ACC Practice Center - Defense Acquisition ...

C-1. Milestone B Documentation (continued)
Typical Document
Request
Software
Support/Sustainment Plan
Systems Engineering Plan
(SEP)
System Training Plan
Technical Order
Management Plan (TOMP)
Description
Describes the activities to ensure that
implemented and fielded software
continues to fully support the
operational mission of the software.
Describes the comprehensive, iterative
technical management process that
includes translating operational
requirements into configured systems,
integrating the technical inputs of the
entire design team, managing
interfaces, characterizing and managing
technical risks, transitioning technology
from the technology base into program
specific efforts, and verifying that
designs meet operational needs. It
addresses life-cycle activities using a
concurrent approach to product and
process development as well as
sustainment.
Identifies the resources required to
establish and maintain an effective
training program throughout the
acquisition life cycle. It controls
planning for meeting the training
requirements and identifies personnel
required to install, operate, maintain, or
to otherwise use the system.
Provides management policy, assigns
responsibilities, defines terminology
and specifies procedures for the
system’s TO Acquisition Program. This
plan provides basic instructions for
development, contractor Quality
Assurance (QA), verification and
formalization of TOs during the
program acquisition phase, and
maintenance of the TOs after
formalization. The TOMP is an
important management tool which is
mandatory for major programs and
should be considered for all programs.
Source
DAG, AKSS
DAG, DODI
5000.2,
USD(AT&L)
Policy memo
(Feb 04)
DAG, AFI 36-
2201V1
TO 00-5-3
Version 1: Jan 2006 40
Air Force Independent Logistics Assessment Handbook