1 Turn off the power of the printer. - Van Mechelen

ESC a n
[Function]
[Code]
Aligning the characters
HH
[Range] 0 n 2
48 n 50
[Outline]
[Caution]
[Default] n = 0
[Sample Program]
[Print Results]
All the printed data within one line are aligned in the specified
position.
• Depending on the value “n”, positional alignment is carried
out as shown in the table below:
n
Position
0,48 Left end alignment
1,49 Centering
2,50 Right end alignment
• This command is valid only when it is inputted at the beginning
of a line.
• This command does not affect the PAGE MODE.
LPRINT CHR$(&H1B) + “a” + CHR$(0);
LPRINT “AAAAA” + CHR$(&HA);
LPRINT CHR$(&H1B) + “a” + CHR$(1);
LPRINT “AAAAA” + CHR$(&HA);
LPRINT CHR$(&H1B) + “a” + CHR$(2);
LPRINT “AAAAA” + CHR$(&HA);
END
AAAAA
AAAAA
AAAAA
Left-justified Centered Right-justified
<
Paper Feed
Direction
— 86 —