1 Turn off the power of the printer. - Van Mechelen

(1) 1st byte (Printer information)
Bit Status Hex. Decimal
0 Unused 00 0
1 Unused 00 0
2
Status of pin 3 of Drawer Kick-Out Connector = “L” 00 0
Status of pin 3 of Drawer Kick-Out Connector = “H” 04 4
3
Online status 00 0
Offline status 08 8
4 Unused 10 16
5
Cover closed 00 0
Cover open 20 32
6
Not in paper feed state triggered by FEED switch 00 0
In paper feed state triggered by FEED switch 40 64
7 Unused 00 0
(2) 2nd byte (Error occurrence information)
Bit Status Hex. Decimal
0 Undefined — —
1 Undefined — —
2
No label detection error occurred
(only when "Label" is selected).
00 0
A label detection error occurred
(only when "Label" is selected).
04 4
3
Auto cutter error not occurred 00 0
Auto cutter error occurred 08 8
4 Unused 00 0
5
Unrecoverable error not occurred 00 0
Unrecoverable error occurred 20 32
6
Auto recovery error not occurred 00 0
Auto recovery error occurred 40 64
7 Unused 00 0
(3) 3rd byte (Paper Sensor information)
Bit Status Hex. Decimal
0,1
Paper found by Paper Near-end Sensor 00 0
Paper not found by Paper Near-end Sensor 03 3
2,3
Paper found by Paper end Sensor 00 0
Paper not found by Paper end Sensor 0C 12
4 Unused 00 0
5 Undefined — —
6 Undefined — —
7 Unused 00 0
— 115 —