1 Turn off the power of the printer. - Van Mechelen

ESC d n
[Function]
[Code]
Printing and feeding the paper by “n” lines
HH
[Range] 0 n 255
[Outline]
[Caution]
[Default]
[Sample Program]
Prints data in the print buffer and feeds paper by “n” lines.
• Specified lines do not remain.
• The beginning of the line is specified as the next print start
position.
If [n × line feed width] exceeds approximately 1016 mm, this
command feeds paper by approximately 1016 mm (40 inches).
The initial value is not defined.
LPRINT “AAAAA”;
LPRINT CHR$(&H1B) + “d” + CHR$(2);
LPRINT “AAAAA” + CHR$(&HA);
END
[Print Results]
AAAAA
AAAAA
<
<
2/6-inch line feed
— 90 —