1 Turn off the power of the printer. - Van Mechelen

ESC E n
[Function]
[Code]
Specifying/Canceling Emphasis Printing
HH
[Range] 0 n 255
[Outline]
[See Also] ESC !
[Sample Program]
Specifying/canceling the emphasized characters.
• “n” is valid only for the lowest bit (n0).
• Control by the lowest bit (n0) is shown as follows:
n0
Function
0 Canceling emphasis printing
1 Specifying emphasis printing
• This is effective to all characters.
• Dot configuration of a emphasized character includes one extra
dot added at its side.
• Emphasis printing can also be specified using ESC !, however,
ESC E or ESC !, whichever command is processed last, takes
precedence.
LPRINT CHR$(&H1B) + “E” + CHR$(0);
LPRINT “AAABBB” + CHR$(&HA);
LPRINT CHR$(&H1B) + “E” + CHR$(1);
LPRINT “AAABBB” + CHR$(&HA);
END
[Print Results]
AAABBB
AAABBB
←⎯⎯ Emphasis canceled
←⎯⎯ Emphasis specified
— 74 —