1 Turn off the power of the printer. - Van Mechelen

4. OPERATION
4.1 Connecting the AC Adapter and AC Power Cord
1
Turn off the power of the printer.
2
For the AC adapter type only: With
the flat side of the AC adapter’s
cable connector facing upward,
insert the cable connector into the
power connector on the back side of
the printer.
3
For the DC Input type only: Use a
cable connector which matches the
power connector and can input DC
24 V/1.9 A to the print.
4
Connect the AC power cord to the
inlet of the printer or the AC adapter,
and insert the AC power-cord plug
into a suitable wall outlet.
CBM1000S (Standard type)
Inlet
AC power cord
Inlet
CBM1000A (AC adapter type)
AC adapter
AC power cord
Power connector
Flat side
Cable connector
CBM1000D (DC Input type)
Power connector
DC 24 V/1.9 A
(Power Voltage)
Flat side
Cable connector
Power connector: TCS7960-53-2010 (Hosiden) or equivalent
Applicable connector: TCP8927-63-1100 (Hosiden) or equivalent
TCP8927-53-1100 (Hosiden) or equivalent
— 11 —