1 Turn off the power of the printer. - Van Mechelen

GS C2 n1 n2
[Function]
[Code]
Setting the numbering counter
HHH
[Range] 0 n1 255
0 n2 255
[Outline]
This command sets the numbering (serial number counter)
value.
n1 + n2 x 256(n1= remainder, n2=quotient) becomes a counter
value.
[Caution]
• If the counter is set with this command, a repeat count of the
idential count will be cleared. If the counter value is beyond
the Range specified with the "GS C1" or "GS C;" command,
the counter will be initialized.
[Default]
Not defined.
[See Also] GS C0, GS C1, GS c, GS C;
[Sample Program]
[Print Result]
See the sample program and print result for the GS C1
command.
— 145 —