1 Turn off the power of the printer. - Van Mechelen

More documents

Recommendations

Info

DLE DC4 n m t [Function] [Code] Outputting specified pulse in real-time. HH [Range] n=1, m=0,1 1 t 8 [Outline] A signal specified with “t” is output to the connector pin specified with “m”. m Connector pin 0 Pin No. 2 of drawer Kick-Out Connector 1 Pin No. 5 of drawer Kick-Out Connector [Details] [Caution] [Reference] • On-time and off-time are set at t × 100 msec, respectively. • In case an error occurred during the processing of this command, the command is ignored. • In case (ESC p or DLE DC4 under execution), during the processing of this command the command is ignored. • This command will be processed as it is received. • In specification of serial interface, the command is executed even in offline, reception buffer full and error conditions. • In specification of parallel interface, this command cannot be executed while the printer is BUSY. • This command will be valid, even if specifying the printer is invalid due to the selection of peripheral units (ESC =). • If another command with the same data string as this is received, the printer operates the same way as with this command. The user should, therefore, be careful. • The command cannot be inserted in another string of commands which consist of codes of 2 bytes or more. ESC p — 54 —
ESC FF [Function] [Code] [Outline] [Caution] Printing data in PAGE MODE HH Executes a batch printout of the data mapped in the entire print area in PAGE MODE. • This command is only effective when PAGE MODE is selected. • Mapped data, as well as the ESC T and ESC W settings, and the character mapping position are held even after printing. [See Also] “PAGE MODE” in APPENDIX 1 ESC RS FF, ESC L, ESC S [Function] [Code] [Outline] [Caution] [Sample Program] [Execution Result] Sound Buzzer HH Sound the buzzer for 200 ms. This command is buffered before execution. LPRINT CHR$(&H1B);CHR$(&H1E); The buzzer sounds for approx. 200 ms. — 55 —
Page 1 and 2:
41.12.08 014/42.55.99 014/59.26.95
Page 3 and 4:
IMPORTANT SAFETY INSTRUCTIONS • R
Page 5 and 6:
IMPORTANT: This equipment generates
Page 7 and 8:
SAFETY PRECAUTIONS — WHICH SHOULD
Page 9 and 10:
PRECAUTIONS FOR INSTALLATION • Do
Page 11 and 12:
In the position indicated below, a
Page 13 and 14:
i DAILY MAINTENANCE Cleaning the pr
Page 15 and 16:
6. PARALLEL INTERFACE .............
Page 17 and 18:
INHALT 4. BETRIEB ................
Page 19 and 20:
1. GENERAL OUTLINE The CBM1000 is a
Page 21 and 22: 2. BASIC SPECIFICATIONS 2.1 Model C
Page 23 and 24: 2.3 Print Paper Specifications 2.3.
Page 25 and 26: 2.3.3 Used Paper Form unit=mm Symbo
Page 27 and 28: 3. OUTER APPEARANCE AND COMPONENT P
Page 29 and 30: 4. OPERATION 4.1 Connecting the AC
Page 31 and 32: 4.3 Connecting the Drawer Kick-Out
Page 33 and 34: 6 Remove an excess length of paper
Page 35 and 36: 4.6 Using 58 mm Wide Paper Rolls 1
Page 37 and 38: 4.9 Operation Panel and Error Indic
Page 39 and 40: Waiting for label cutter action: Wa
Page 41 and 42: 5. SETTING DIP SWITCHES 5.1 Locatio
Page 43 and 44: DIP switch 2 No. Function ON OFF Fa
Page 45 and 46: 6. PARALLEL INTERFACE 6.1 Bidirecti
Page 47 and 48: CAUTION: • The first letter “n
Page 49 and 50: 6.2.3 Timing Chart (Compatibility M
Page 51 and 52: 7.2 Connector Pin Configuration No.
Page 53 and 54: 7.3.2 Error Detection Detection of
Page 55 and 56: 8. DRAWER KICK-OUT CONNECTOR AND PO
Page 57 and 58: 9. MAINTENANCE AND SERVICE For the
Page 59 and 60: No. Command Function Mode Code Page
Page 61 and 62: Label Control No. Command Function
Page 63 and 64: 10.2.2 Command Details HT [Function
Page 65 and 66: CR [Function] [Code] Back to printi
Page 67 and 68: CAN [Function] [Code] [Outline] [Ca
Page 69 and 70: (1) Printer status (When n = 1 is s
Page 71: DLE ENQ n [Function] [Code] Real-ti
Page 75 and 76: [Sample Program] [Print Results] LP
Page 77 and 78: [Sample Program] LPRINT CHR$(&H1B)
Page 79 and 80: [Sample Program] [Print Results] LP
Page 81 and 82: ESC & s n m [a [p] s×a] m-n+1 [Fun
Page 83 and 84: ESC * m n1 n2 [ d ] k [Function] [C
Page 85 and 86: ESC - n [Function] [Code] Specifyin
Page 87 and 88: ESC 3 n [Function] [Code] Setting l
Page 89 and 90: ESC n [Function] [Code] Deleting d
Page 91 and 92: ESC D [ n ] k NUL [Function] [Code]
Page 93 and 94: ESC G n [Function] [Code] Specifyin
Page 95 and 96: ESC L [Function] [Code] [Outline] [
Page 97 and 98: ESC R n [Function] [Code] Selecting
Page 99 and 100: ESC T n [Function] [Code] Selecting
Page 101 and 102: ESC W xL xH yL yH dxL dxH dyL dyH [
Page 103 and 104: ESC \ nL nH [Function] [Code] Speci
Page 105 and 106: ESC c 3 n [Function] [Code] Selecti
Page 107 and 108: ESC c 5 n [Function] [Code] Enablin
Page 109 and 110: ESC p m n1 n2 [Function] [Code] Gen
Page 111 and 112: ESC { n [Function] [Code] Specifyin
Page 113 and 114: [Default] n = 0 [See Also] ESC !
Page 115 and 116: GS * n1 n2 [ d ] n1×n2×8 [Functio
Page 117 and 118: GS ( A pL pH n m [Function] [Code]
Page 119 and 120: GS : [Function] [Code] [Outline] [C
Page 121 and 122: GS H n [Function] [Code] Selecting
Page 123 and 124:
GS I n [Function] [Code] Sending th
Page 125 and 126:
[Default] nL = 0, nH = 0 [See Also]
Page 127 and 128:
GS V m ......... (1) GS V m n .....
Page 129 and 130:
(2) If a sufficient area cannot be
Page 131 and 132:
GS ^ n1 n2 n3 [Function] [Code] Exe
Page 133 and 134:
(1) 1st byte (Printer information)
Page 135 and 136:
GS f n [Function] [Code] Selecting
Page 137 and 138:
GS k m [d1 ..... dk] NUL GS k m n [
Page 139 and 140:
[Default] For PAGE MODE: • This c
Page 141 and 142:
CODABAR (NW-7) CODE93 This bar code
Page 143 and 144:
[Sample Program] Special characters
Page 145 and 146:
GS r n [Function] [Code] Sending st
Page 147 and 148:
GS v 0 m xL xH yL yH d1...dk [Funct
Page 149 and 150:
GS w n [Function] [Code] Specifying
Page 151 and 152:
[Caution] [Reference] • Because f
Page 153 and 154:
[Caution] [Reference] • When the
Page 155 and 156:
• When the size of a bit image ex
Page 157 and 158:
• If outside-defined-area argumen
Page 159 and 160:
GS FF [Function] [Code] [Outline] [
Page 161 and 162:
GS C0 m n [Function] [Code] [Range]
Page 163 and 164:
GS C2 n1 n2 [Function] [Code] Setti
Page 165 and 166:
GS c [Function] [Code] [Outline] Pr
Page 167 and 168:
11.1.3 Codepage PC850 (Multilingual
Page 169 and 170:
11.1.7 Codepage PC852 (Eastern Euro
Page 171 and 172:
11.2 International Character Codes
Page 173 and 174:
12.2 Mapping of print data in the p
Page 175 and 176:
12.2.1 Example of the Use of PAGE M
Page 177 and 178:
Before an FF is sent, the following
Page 179 and 180:
13.1.2 Interfacing Phases Interfaci
Page 181 and 182:
13.2.3 Precautions 1) The Negotiati
Page 183 and 184:
12) If the host selected the Revers
Page 185 and 186:
(1) Termination through a handshake
Page 187 and 188:
15. APPENDIX 4. OUTLINE DRAWING 15.
Page 189 and 190:
15.3 AC Adapter (31AD) —171 —
Page 191 and 192:
GERMAN — 173 —
Page 193 and 194:
SICHERHEITSVORSCHRIFTEN — BITTE U
Page 195 and 196:
VORSICHTSMASSNAHMEN FÜR DIE INSTAL
Page 197 and 198:
Nachstehend wird ein Warnschild des
Page 199 and 200:
i TÄGLICHE WARTUNGSARBEITEN Reinig
Page 201 and 202:
ACHTUNG : • Verwenden Sie ausschl
Page 203 and 204:
4.3 Anschließen des Drawer Kickout
Page 205 and 206:
6 Trennen Sie das überstehende Pap
Page 207 and 208:
4.6 Verwenden von 58 mm breiten Pap
Page 209 and 210:
4.9 Bedienungsfeld und Fehleranzeig
Page 211 and 212:
werden der Papierschneider und der
Page 213 and 214:
5. EINSTELLEN DER DIP-SCHALTER 5.1
Page 215 and 216:
DIP-Schalter 2 No. Funktion ON OFF
Page 217 and 218:
6. PARALLELE SCHNITTSTELLE 6.1 Bidi
Page 219 and 220:
ACHTUNG: • Wenn der erste Buchsta
Page 221 and 222:
6.2.3 Timing-Tabelle (Kompatibilit
Page 223 and 224:
7.2 Belegung der Anschlußstifte No
Page 225 and 226:
(6) FG Hierbei handelt es sich um e
Page 227 and 228:
8. DRAWER KICKOUT-ANSCHLUSS UND STR
Page 229 and 230:
9. WARTUNG UND KUNDENDIENST Informa
show all

1 Turn off the power of the printer. - Van Mechelen

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?