1 Turn off the power of the printer. - Van Mechelen

(1) Printer status (When n = 1 is specified)
Bit Status Hex. Decimal
0 Unused 00 0
1 Unused 02 2
2
Status of pin 3 of Drawer Kick-Out
Connector = L
00 0
Status of pin 3 of Drawer Kick-Out
Connector = H
04 4
3
Online status 00 0
Offline status 08 8
4 Unused 10 16
5 Undefined — —
6 Undefined — —
7 Unused 00 0
(2) Status caused by an offline condition (When n = 2 is specified)
Bit Status Hex. Decimal
0 Unused 00 0
1 Unused 02 2
2
Cover closed 00 0
Cover open 04 4
3
Not in paper feed state triggered by
FEED switch
00 0
In paper feed state triggered by FEED
switch
08 8
4 Unused 10 16
5
Printing is not stopped because of
“paper out” state
00 0
Printing is stopped because of
“paper out” state
20 32
6
Error not occurred 00 0
Error occurred 40 64
7 Unused 00 0
Bit 5: Printing is stopped if the paper end detector detects a
“paper out” state, or if the printer is out of paper when
the Paper Near-end Sensor is enabled by ESC c 4. At this
time, bit 5 = “1”.
— 51 —