1 Turn off the power of the printer. - Van Mechelen

ESC G n
[Function]
[Code]
Specifying/Canceling Double strike printing
HH
[Range] 0 n 255
[Outline]
[Caution]
[See Also]
[Sample Program]
Specifying/canceling the double strike printing.
• “n” is valid only for the lowest bit (n0).
• Control by the lowest bit (n0) is shown as follows.
n0
Function
0 Canceling double strike printing
1 Specifying double strike printing
This is effective to all characters.
With this printer,double-strike printing and emphasis printing
provide completely the same results.
ESC E
LPRINT CHR$(&H1B) + “G” + CHR$(0);
LPRINT “AAABBB” + CHR$(&HA);
LPRINT CHR$(&H1B) + “G” + CHR$(1);
LPRINT “AAABBB” + CHR$(&HA);
END
[Print Results]
AAABBB
AAABBB
←⎯⎯ Double strike printing canceled
←⎯⎯ Double strike printing specified
— 75 —