1 Turn off the power of the printer. - Van Mechelen

Before an FF is sent, the following program code can be added to remove part of
the data.
LPRINT CHR$(&H1B) + “W” + CHR$((72) + CHR$(0) + CHR$(120) + CHR$(0);
LPRINT CHR$(36) + CHR$(0) + CHR$(48) + CHR$(0);
LPRINT CHR$(&H18);
LPRINT CHR$(&HC);
END
As a result of the additional program code, a print-out is executed as shown in
Figure 1-3, where the string “GHI” is removed. When strings are removed with
CAN, the area where the string would have been is not used by the rest of the data,
instead it is converted into a sequence of spaces.
(0,0) 200
Page Mode lesson
2CAN command
ABCDEF JKLMNOP
400 QRSTU1234567890
Print Area
Paper
Figure 1-3
—159 —