1 Turn off the power of the printer. - Van Mechelen

4.9 Operation Panel and Error Indication
POWER lamp (Green)
Lights when the power is turned on. It blinks when a memory check error has
occurred.
ERROR lamp (Red)
Lights or blinks to show different error states. It also blinks while the printer is
waiting for a macro to be executed. (See “10.1 Command List”, and “Executing
the macro”.)
Error indication
POWER LED
ERROR LED
Recovery method
Memory check error
(Quick blinking)
Lights
Cover open Lights Lights
Not recoverable.
Close the cover.
Head overheat
Lights
(Slow blinking)
Recovers automatically when the
temperature returns to normal.
Paper near-end
Lights
Lights
Set a new paper roll.
Paper end
Lights
Lights
Set a new paper roll.
Cutter motor lock
Lights
(Quick & Slow blinking)
Remove paper jams.
Macro execution wait
Lights
(Blinking)
Press the FEED switch.
Low voltage error
Lights
Lights
Not recoverable.
High voltage error
Lights
(Quick & Slow blinking)
Not recoverable.
Waiting for label
cutter action
OFF
(Blinking)
Press the FEED switch.
Label detection error
OFF
(Slow blinking)
Set the specified label roll.
Waiting for label
peeling action
OFF
(Blinking)
Discharge labels from Exfoliation
Mechanism.
— 19 —