SafeCom Go HP Administrator's Manual D60701

More documents

Recommendations

Info

2 SafeCom Go HP - Device Server 2.4.3 Add device via SafeCom Device Server 1. Click Device Server in the left menu. 2. Click the Add device button to launch the Add device wizard. 3. Enter the hostname or the IP address of the device. Click Next. 4. Information is retrieved from the device to establish the type of device. In the OperatorPassword field you MUST enter the same password that is used to access the device web page. 5. Click Finish. 6. Click the Save button. Note: The device is now added to the SafeCom solution, but it does not appear in the SafeCom Administrator before a user logs in at the device. D60701-30 30
2 SafeCom Go HP - Device Server 2.5 Configure the device on the device web page The device is now added to the SafeCom Device Server, but a few things must be verified manually on the web page for each device. For both MFPs and Printers: � Set up device server address (2.5.1) For MFPs only: � Verify the sign in method and access control (2.5.2) � Verify the Quota Server Address (2.5.3) 2.5.1 Set up device server address 1. Access the SafeCom configuration page, by clicking the General tab and then SafeCom in the menu on the left. 2. Under Configuration, verify that the server address specified in the Server Address field points to the SafeCom Device Server. � Server port 50002 is specified when using SSL (secure socket layer). � Server port 8080 is specified when using unencrypted. Note: By adding more server addresses under Configuration, it is possible to set up the server failover list for the device. This is then automatically updated on the device server web page and vice versa. 3. Click Apply at the bottom of the web page. The following 5 icons represent the status of the devices: Connected: This is the device server that the device is connected to. Valid, but not connected: The device server is running but the device is connected to another device server. Testing: The server address is being tested. Invalid: The server address is not that of a SafeCom Device Server. Not responding: The device server is not responding. D60701-30 31
Page 1 and 2: pre- SafeCom Go HP Administrator’
Page 3 and 4: Table of contents 1 Introduction ..
Page 5 and 6: 4.1.1 Login .......................
Page 7 and 8: 4.19 HP Color LaserJet 4700 .......
Page 9 and 10: 1 Introduction Table 1 SafeCom Go H
Page 11 and 12: 1 Introduction A Use of ID code and
Page 13 and 14: 1 Introduction 1.4 SafeCom P:Go HP
Page 15 and 16: 1 Introduction 1.6 Supported langua
Page 17 and 18: 1 Introduction Remarks: � The ins
Page 19 and 20: 1 Introduction 1.10 Document histor
Page 21 and 22: 1 Introduction Revision D60701-21
Page 23 and 24: 2 SafeCom Go HP - Device Server 2.2
Page 29: 2 SafeCom Go HP - Device Server 8.
Page 35 and 36: 2 SafeCom Go HP - Device Server Not
Page 41 and 42: 2 SafeCom Go HP - Device Server Thi
Page 51 and 52: 3 SafeCom Go HP 3 SafeCom Go HP 3.1
Page 53 and 54: 3 SafeCom Go HP 3.2.2 Embedded ID D
Page 55 and 56: 3 SafeCom Go HP 3.2.3 SafeCom HP FM
Page 57 and 58: 3 SafeCom Go HP The remaining steps
Page 59 and 60: 3 SafeCom Go HP 3.3.3 Control Devic
Page 61 and 62: 3 SafeCom Go HP 7. Edit the placeme
Page 63 and 64: 3 SafeCom Go HP 3.5 SafeCom Go HP w
Page 65 and 66: 3 SafeCom Go HP 3.5.3 Configuration
Page 67 and 68: 3 SafeCom Go HP o Blank (default):
Page 69 and 70: 3 SafeCom Go HP The E-mail section
Page 71 and 72: 3 SafeCom Go HP 3.5.4 Register web
Page 73 and 74: 3 SafeCom Go HP 3.6 SafeCom Go HP -
Page 75 and 76: 3 SafeCom Go HP 3.6.5 Disable Encry
Page 77 and 78: 3 SafeCom Go HP 3.6.11 Select login
Page 79 and 80: 3 SafeCom Go HP 3.6.17 Enable Send
Page 81 and 82:
3 SafeCom Go HP Check Force BCC to
Page 83 and 84:
3 SafeCom Go HP 3.6.23 Enable Third
Page 85 and 86:
3 SafeCom Go HP 3.6.26 Determine th
Page 87 and 88:
3 SafeCom Go HP 3.6.30 How to obtai
Page 89 and 90:
3 SafeCom Go HP 3.7 SafeCom Go HP u
Page 91 and 92:
3 SafeCom Go HP 3.10 Make all print
Page 93 and 94:
4 Using SafeCom Go HP Login with ID
Page 95 and 96:
4 Using SafeCom Go HP 4.1.3 Registe
Page 97 and 98:
4 Using SafeCom Go HP 4.1.7 E-mail
Page 99 and 100:
4 Using SafeCom Go HP 4.2 HP LaserJ
Page 101 and 102:
Page 103 and 104:
4 Using SafeCom Go HP 4.2.3 Pull Pr
Page 105 and 106:
4 Using SafeCom Go HP 4.2.8 Logout
Page 107 and 108:
4 Using SafeCom Go HP 4.2.10 Change
Page 109 and 110:
4 Using SafeCom Go HP The recommend
Page 111 and 112:
4 Using SafeCom Go HP 4.3.3 Pull Pr
Page 113 and 114:
Page 115 and 116:
4 Using SafeCom Go HP 4.4 HP Scanje
Page 117 and 118:
Page 119 and 120:
4 Using SafeCom Go HP Register card
Page 121 and 122:
4 Using SafeCom Go HP 4.4.6 Account
Page 123 and 124:
4 Using SafeCom Go HP The recommend
Page 125 and 126:
4 Using SafeCom Go HP 4.5.3 Folder
Page 127 and 128:
4 Using SafeCom Go HP Register card
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
4 Using SafeCom Go HP 4.6.4 Copy 4.
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
4 Using SafeCom Go HP 4.11 HP Laser
Page 143 and 144:
4 Using SafeCom Go HP 4.12.3 Pull P
Page 145 and 146:
Page 147 and 148:
4 Using SafeCom Go HP 4.15.3 Pull P
Page 149 and 150:
Page 151 and 152:
4 Using SafeCom Go HP 4.19 HP Color
Page 153 and 154:
4 Using SafeCom Go HP 4.20 HP Color
Page 155 and 156:
5 Automatic installation via HP Web
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
6 Troubleshooting 6 Troubleshooting
Page 171 and 172:
6 Troubleshooting 6.4 SafeCom Go HP
Page 173 and 174:
6 Troubleshooting 6.12 At the Print
Page 175 and 176:
7 Regulatory information 7 Regulato
Page 178:
8 Index D60701-30 178
show all

SafeCom Go HP Administrator's Manual D60701

Create successful ePaper yourself

Delete template?

Save as template?