SafeCom Go HP Administrator's Manual D60701

2 SafeCom Go HP - Device Server
Thirdly, make sure that the Main Color Settings are set up correctly on the
device's web page. The settings need to match the setting on the device server.
To open the Main Color Settings:
1. Open the device in a web browser and login (2.8.1).
2. Click the Copy/Print tab and then Restrict Color.
3. Verify that the copy color settings under Main Color Settings are set up
so they match the settings on the device server. If for example copy color
is enabled in the device server, the Enable Color on the web page must
be checked as well.
4. Click Apply at the bottom of the web page.
2.9.4 Enable Scan to Folder
For SafeCom to be able to control access and track Scan to Folder, it needs to
be set up as follows:
� Tracking of Scan to Folder must be enabled in SafeCom Device Server.
� The authentication method must be set up to SafeCom on the web page
for the individual device.
� The save to folder application for each device must be enabled on the
device's web page.
First enable SafeCom to do tracking on copy and copy color on the Device
server:
1. Open a web browser and login to the SafeCom Device Server (2.3.10).
2. Click on Device server in the menu on the left, and then click on the
device.
3. Click Device applications.
4. Make sure that Scan To Folder is checked in the list of applications.
5. Click Save.
Second, the authentication method on the web page must be set up for the
Save to Network Folder application on the device:
1. Open the device in a web browser and login (2.8.1).
2. Click the Security tab and then Access Control.
3. Under Control Panel Application, restrict the access for the copying by
clicking the Device Guest checkbox for Network Folder application.
4. If you want to restrict access for editing the network folder path, expand
Network Folder application and check Device Guest for Ability to edit
network folder path.
5. Choose SafeCom as the Sign In Method.
6. Click Apply at the bottom of the web page.
D60701-30 41