AT Commands Set

7 Camera Related Commands
7.1 AT+CCAMS Start camera
Description
The command is used to start camera. Make sure the sensor is existent and connect well. Camera
must be started before taking picture or recording video.
SIM PIN
NO
References
Vendor
Syntax
Execution Command
AT+CCAMS
Responses
OK
If have no sensor:
CAMERA NO SENSOR
ERROR
If camera has started:
CAMERA INVALID STATE
ERROR
Examples
AT+CCAMS
OK
7.2 AT+CCAME Stop camera
Description
The command is used to stop camera.
If AT+CCAMTP has executed to take a picture and the picture is not saved by AT+CCAMEP, the
picture will not be saved after AT+CCAME execution.
If AT+CCAMRS has executed to record video and that is not ended by AT+CCAMRE, the video
file will be stopped recording and saved after AT+CCAME execution.
SIM PIN
NO
References
Vendor
Syntax