AT Commands Set

SIM5215_SIM5216 AT Command Manual
Figure 17-1 Select file for transmission
2. Select the file directly with subparameter of AT+CTXFILE is not 0 and not omitted;
this method is a shortcut method for limited directories. [Figure 17-2]
Figure 17-2 Select file directly for transmission
Step2. Open “Receive File” dialog box
After select transmitted file successfully, use “Transfer>Receive File…” menu to open “Receive File”
dialog box in HyperTerminal. [Figure 17-3]
SIM5215_SIM5216_AT Command Manual_V1.13 415
1/13/2011