AT Commands Set

SIM5215_SIM5216 AT Command Manual
+CPAS: 3
OK
AT+CPAS=?
+CPAS: (0,3,4)
OK
10.4 AT+CFUN Set phone functionality
Description
The command selects the level of functionality in the ME. Level "full functionality" is where
the highest level of power is drawn. "Minimum functionality" is where minimum power is drawn.
Level of functionality between these may also be specified by manufacturers. When supported by
manufacturers, ME resetting with parameter may be utilized.
NOTE AT+CFUN=6 must be used after setting AT+CFUN=7.
SIM PIN References
NO 3GPP TS 27.007
Syntax
Test Command
AT+CFUN=?
Responses
+CFUN: (list of supported s), (list of supported s)
OK
ERROR
+CME ERROR:
Read Command
AT+CFUN?
Responses
+CFUN:
OK
ERROR
+CME ERROR:
Write Command
AT+CFUN=[,]
Responses
OK
ERROR
+CME ERROR:
Defined values
0 – minimum functionality
1 – full functionality, online mode
4 – disable phone both transmit and receive RF circuits
SIM5215_SIM5216_AT Command Manual_V1.13 184
1/13/2011