AT Commands Set

SIM5215_SIM5216 AT Command Manual
Figure 17-9 Set file name and storage place
2. Set storage place directly with parameter of AT+CTXFILE is not 0 and not omitted;
this method is a shortcut method for limited directories.
Step2. Open “Send File” dialog box
After set file name and storage place successfully, use “Transfer>Send File…” menu to open “Send
File” dialog box in HyperTerminal. [Figure 17-10]
Figure 17-10
Open “Send File” dialog box
Step3. Select file and transmitting protocol
In “Send File” dialog box, select the file to be transmitted in text box, and select the transmitting
protocol in combo box. Then click “Send” button to start transmission. [Figure 17-11]
NOTE The transmitting protocol must be “Xmodem” protocol.
SIM5215_SIM5216_AT Command Manual_V1.13 419
1/13/2011