28.04.2015 Views

AT Commands Set

AT Commands Set

AT Commands Set

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

SIM5215_SIM5216 <strong>AT</strong> Command Manual<br />

10 Mobile Equipment Control and Status <strong>Commands</strong><br />

10.1 +CME ERROR Mobile Equipment error result code<br />

Description<br />

The operation of +CME ERROR: result code is similar to the regular ERROR result code: if<br />

+CME ERROR: is the result code for any of the commands in a command line, none of the<br />

following commands in the same command line is executed (neither ERROR nor OK result code<br />

shall be returned as a result of a completed command line execution). The format of can be<br />

either numeric or verbose. This is set with command <strong>AT</strong>+CMEE.<br />

SIM PIN References<br />

NO 3GPP TS 27.007<br />

Syntax<br />

+CME ERROR: <br />

Defined values<br />

<br />

Values (numeric format followed by verbose format):<br />

0 phone failure<br />

1 no connection to phone<br />

2 phone adaptor link reserved<br />

3 operation not allowed<br />

4 operation not supported<br />

5 PH-SIM PIN required<br />

6 PH-FSIM PIN required<br />

7 PH-FSIM PUK required<br />

10 SIM not inserted<br />

11 SIM PIN required<br />

12 SIM PUK required<br />

13 SIM failure<br />

14 SIM busy<br />

15 SIM wrong<br />

16 incorrect password<br />

17 SIM PIN2 required<br />

18 SIM PUK2 required<br />

20 memory full<br />

21 invalid index<br />

22 not found<br />

SIM5215_SIM5216_<strong>AT</strong> Command Manual_V1.13 179<br />

1/13/2011

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!