AT Commands Set

SIM5215_SIM5216 AT Command Manual
Description
The command is used to set the parameters for sending MMS.
SIM PIN
YES
References
Vendor
Syntax
Test Command
Responses
AT+CMMSSENDCFG=? +CMMSSENDCFG: (0-6),(0-3),(0,1),(0,1),(0-2),(0-4)
OK
Read Command
AT+CMMSSENDCFG?
Write Command
AT+CMMSSENDCFG=,,,,,
Responses
+CMMSSENDCFG:
,,,,,
OK
Responses
OK
ERROR
+CME ERROR:
Defined values
The valid time of the sent MMS:
0 – 1 hour.
1 – 12 hours.
2 – 24 hour.
3 – 2 days.
4 – 1 week.
5 – maximum.
6 – Not set (default).
Priority:
0 – lowest.
1 – normal.
2 – highest.
3 – Not set (default)
Whether need delivery report:
0 – No (default).
1 – Yes.
Whether need read report:
SIM5215_SIM5216_AT Command Manual_V1.13 378
1/13/2011