28.04.2015 Views

AT Commands Set

AT Commands Set

AT Commands Set

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

SIM5215_SIM5216 <strong>AT</strong> Command Manual<br />

Syntax<br />

Test Command<br />

<strong>AT</strong>+CBC=?<br />

Execution Command<br />

<strong>AT</strong>+CBC<br />

Responses<br />

+CBC: (list of supported s),(list of supported s)<br />

OK<br />

Responses<br />

+CBC: ,,V<br />

OK<br />

+CME ERROR: <br />

Defined values<br />

<br />

0 Battery powered<br />

<br />

0…100 Battery charge level<br />

<br />

Current voltage value (V).<br />

Examples<br />

<strong>AT</strong>+CBC=?<br />

+CBC: (0),(0-100)<br />

OK<br />

<strong>AT</strong>+CBC<br />

+CBC: 0,75,3.810V<br />

OK<br />

12.26 <strong>AT</strong>+CDTRISRMD Configure the trigger condition for DTR’s<br />

interrupt.<br />

Description<br />

This command is used to set the appropriate trigger condition for DTR’s interrupt, which will<br />

finally waking up the module.<br />

This command is only valid while the UART is under NULL modem mode.<br />

The interrupt is low level triggered by default.<br />

SIM PIN References<br />

No Vendor<br />

Syntax<br />

Test Command<br />

Responses<br />

SIM5215_SIM5216_<strong>AT</strong> Command Manual_V1.13 229<br />

1/13/2011

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!