AT Commands Set

SIM5215_SIM5216 AT Command Manual
2 –
3 –
(Packet Data Protocol type) a string parameter which specifies the type of packet data protocol.
IP Internet Protocol
PPP Point to Point Protocol
IPV6 Internet Protocol Version 6
Examples
AT+CGQREQ?
+CGQREQ:
OK
AT+CGQREQ=?
+CGQREQ: "IP",(0-3),(0-4),(0-5),(0-9),(0-18,31)
+CGQREQ: "PPP",(0-3),(0-4),(0-5),(0-9),(0-18,31)
OK
17.4 AT+CGQMIN Quality of service profile (minimum acceptable)
Description
The command allows the TE to specify a minimum acceptable profile which is checked by the MT
against the negotiated profile returned in the Activate PDP Context Accept message.A special form
of the set command,AT+CGQMIN= causes the minimum acceptable profile for context
number to become undefined.
SIM PIN References
YES 3GPP TS 27.007
Syntax
Test Command
AT+CGQMIN=?
Read Command
Responses
+CGQMIN: , (list of supported s), (list
of supported s), (list of supported s) , (list of
supported s), (list of supported s) [
+CGQMIN: , (list of supported s), (list
of supported s), (list of supported s) , (list of
supported s), (list of supported s)[…]]
OK
ERROR
Responses
SIM5215_SIM5216_AT Command Manual_V1.13 272
1/13/2011