AT Commands Set

SIM5215_SIM5216 AT Command Manual
8 – file to be transmitted is in “D:/Audio” directory
NOTE If is omitted, it will select a file to be transmitted which is in current directory.
AT+FSCD and AT+FSLS being used in combination can help user to check the file selected
whether existing or not.
0 – Xmodem
1 – 1K Xmodem
Examples
AT+CTXFILE=”image_0.jpg”, 1,1
OK
……
AT+FSCD=C:/Video
+FSCD: C:/Video/
OK
AT+FSLS
video_0.mp4 video_1.mp4
OK
AT+CTXFILE=”video_2.mp4”
OK
….
15.2 AT+CRXFILE Set name of file received from PC host
Description
The command is used to set file name which is received from PC host to file system of module.
After setting successfully, use HyperTerminal to send the file over Xmodem protocol [refer AT
Commands Samples: File received from PC host].
SIM PIN
NO
References
Vendor
Syntax
Test Command
AT+CRXFILE=?
Responses
+CRXFILE :(list of supported s)
OK
Write Command
AT+CRXFILE=
[,]
Responses
OK
FILE IS EXISTING
SIM5215_SIM5216_AT Command Manual_V1.13 254
1/13/2011