AT Commands Set

SIM5215_SIM5216 AT Command Manual
NO
Vendor
Syntax
Test Command
AT+CNVR=?
Write Command
AT+CNVR=[,]
Responses
+CNVR: (0-),
OK
Responses
If is given as the only parameter:
+CNVR: ,,,
OK
If successful,return:
+CNVR: 1,
OK
If fail,return:
+CNVR: 0,
OK
Defined values
Maximum number of item supported by module.
Maximum length of .
Item number in NV(nonvolatile memory).These items store some configuration of RF,Audio,etc.
Index of array.Some items is stored by array.When operating these items,you must specify the
index.To other items(not stored by array),the index is 0.
Data(string type) that written to . is in hexadecimal format.The length of
is not more than *2.
Presence of item.
0 not present
1 present
Size of array.If is stored by array,the value of must be less than .
Size of item.The value is given in octets.Because the format of is hexadecimal,the
length of should be equal to *2.
SIM5215_SIM5216_AT Command Manual_V1.13 200
1/13/2011