AT Commands Set

SIM5215_SIM5216 AT Command Manual
OK
If camera in a wrong state:
CAMERA INVALID STATE
ERROR
If camera not starting:
CAMERA NOT START
ERROR
Defined values
If saved in ME:
“C:/Picture/YYYYMMDD_HHMMSS.jpg”
If saved in SD card:
“D:/Picture/YYYYMMDD_HHMMSS. jpg”.
Examples
AT+CCAMEP
C:/Picture/20080420_120303.jpg
OK
7.12 AT+CCAMRS Start video record
Description
The command is used to start video recording and save the video file by MP4 format. The name of
video file will be generated automatically based on system time [refer AT+CCLK], and the storage
location of video file refers to AT+FSLOCA.
Note If storage space isn’t enough during recording, the module will stop recording video and
save the media file. Before AT+CCAMRS execution, please make sure the current dimension is
supported for recording video.
SIM PIN
NO
References
Vendor
Syntax
Execution Command
AT+CCAMRS
Responses
OK
If storage space is full:
CAMERA NO MEMORY
SIM5215_SIM5216_AT Command Manual_V1.13 114
1/13/2011