AT Commands Set

SIM5215_SIM5216 AT Command Manual
The command is used to take a picture after camera is started and setting parameters if need.
NOTE AT+CCAMTP is used to take a picture, but not save; and AT+CCAMEP is used to save the
picture after AT+CCAMTP execution. If AT+CCAMTP is executed more times continuously,
AT+CCAMEP will save the picture which is taken by the last AT+CCAMTP.
NOTE If GPS is running and fixed already, the GPS information (include latitude, longitude, altitude
and Date-Time) will store in JPEG EXIF tab when taking picture.
SIM PIN References
NO Vendor
Syntax
Execution Command
AT+CCAMTP
Responses
OK
If storage space is full:
CAMERA NO MEMORY
ERROR
If camera in a wrong state:
CAMERA INVALID STATE
ERROR
If camera not starting:
CAMERA NOT START
ERROR
Examples
AT+CCAMTP
OK
7.11 AT+CCAMEP Save picture
Description
The command is used to save a picture taken by last AT+CCAMTP in JPEG format. File name is
generated automatically based on system time [refer AT+CCLK], and the storage location of picture
refers to AT+FSLOCA.
SIM PIN
NO
References
Vendor
Syntax
Execution Command
AT+CCAMEP
Responses
SIM5215_SIM5216_AT Command Manual_V1.13 113
1/13/2011