AT Commands Set

SIM5215_SIM5216 AT Command Manual
+CFTPGETFILE:
Defined values
The remote file path. When the file path doesn’t contain ”/”, this command transfers file from the
current remote FTP directory. If the file path contains non-ASCII characters, the file path parameter
should contain a prefix of {non-ascii}.
The directory to save the downloaded file:
0 – current directory [refer to AT+FSCD]
1 – “C:/Picture” directory
2 – “C:/Video” directory
3 – “C:/VideoCall” directory
4 – “D:/Picture” directory
5 – “D:/Video” directory
6 – “D:/VideoCall” directory
7 – “C:/Audio” directory
8 – “D:/Audio” directory
The error code of FTP operation.
Examples
AT+CFTPGETFILE=”/pub/mydir/test1.txt”,1
OK
…
+CFTPGETFILE: 0
AT+CFTPGETFILE=” test2.txt”,2
OK
…
+CFTPGETFILE: 0
AT+CFTPGETFILE={non-ascii}” B2E2CAD42E747874”,2
OK
…
+CFTPGETFILE: 0
AT+CFTPGETFILE=?
+CFTPGETFILE: [{non-ascii}]“FILEPATH”,(0-8)
OK
20.3.8 AT+CFTPPUTFILE Put a file in module EFS to FTP server
Description
The command is used to upload a file in the module EFS to FTP server.
SIM5215_SIM5216_AT Command Manual_V1.13 347
1/13/2011