AT Commands Set

SIM5215_SIM5216 AT Command Manual
+CHTTPS: RECV EVENT
When the AT+CHTTPSRECV is not being called, and there is data
cached in the receiving buffer, this event will be reported.
20.6 Secure File Transfer Protocol Service
The FTPS related AT commands needs the AT+CATR to be set to the used port. AT+CATR=0
may cause some problem.
20.6.1 AT+CFTPSSTART Acquire FTPS protocol stack
Description
This command is used to acquire FTPS protocol stack.
SIM PIN
YES
References
Vendor
Syntax
Execute Command
AT+CFTPSSTART
Responses
OK
ERROR
Examples
AT+CFTPSSTART
OK
20.6.2 AT+CFTPSSTOP Stop FTPS protocol stack
Description
This command is used to stop FTPS protocol stack. Currently only explicit FTPS mode is
supported.
SIM PIN References
YES Vendor
Syntax
Execute Command
AT+CFTPSSTOP
Responses
OK
ERROR
Examples
AT+CFTPSSTOP
SIM5215_SIM5216_AT Command Manual_V1.13 360
1/13/2011