AT Commands Set

SIM5215_SIM5216 AT Command Manual
5 – Factory Test Mode
6 – Reset
7 – Offline Mode
0 – do not reset the ME before setting it to power level
1 – reset the ME before setting it to power level. This value only takes effect when
equals 1.
Examples
AT+CFUN?
+CFUN: 1
OK
AT+CFUN=0
OK
10.5 AT+CPIN Enter PIN
Description
The command sends to the ME a password which is necessary before it can be operated (SIM PIN,
SIM PUK, PH-SIM PIN, etc.). If the PIN is to be entered twice, the TA shall automatically repeat
the PIN. If no PIN request is pending, no action is taken towards MT and an error message, +CME
b is returned to TE.
If the PIN required is SIM PUK or SIM PUK2, the second pin is required. This second pin,
, is used to replace the old pin in the SIM.
SIM PIN References
NO 3GPP TS 27.007
Syntax
Test Command
AT+CPIN=?
Read Command
AT+CPIN?
Write Command
AT+CPIN=
[,]
Responses
OK
Responses
+CPIN:
OK
ERROR
+CME ERROR:
Responses
OK
ERROR
+CME ERROR:
SIM5215_SIM5216_AT Command Manual_V1.13 185
1/13/2011