AT Commands Set

SIM5215_SIM5216 AT Command Manual
AT+CBST?
+CBST:0,0,1
OK
4.14 AT+CRLP Radio link protocol
Description
Radio Link Protocol(RLP) parameters used when non-transparent data calls are originated may be
altered with write command.
Read command returns current settings for each supported RLP version . Only RLP
parameters applicable to the corresponding are returned.
Test command returns values supported by the TA as a compound value. If ME/TA supports several
RLP versions , the RLP parameter value ranges for each are returned in a separate
line.
SIM PIN References
YES 3GPP TS 27.007
Syntax
Test Command
AT+CRLP=?
Read Command
AT+CRLP?
Write Command
AT+CRLP=
[,[,[,
[,[,]]]]]
Execution Command
AT+CRLP
Responses
+CRLP: (list of supported s), (list of supported s),
(list of supported s), (list of supported s) [,
[,(list of supported s)]][
+CRLP: (list of supported s), (list of supported s),
(list of supported s), (list of supported s) [,
[,(list of supported s)]]
[...]]
OK
Responses
+CRLP: , , , [, [, ]][
+CRLP:,,,[,[,]]
[...]]
OK
Responses
OK
ERROR
Responses
OK
SIM5215_SIM5216_AT Command Manual_V1.13 43
1/13/2011