AT Commands Set

SIM5215_SIM5216 AT Command Manual
Integer type, max length of password.
Examples
AT+CPWD=?
+CPWD: ("AB",4),("SC",8),("P2",8)
OK
9.5 AT+CLIP Calling line identification presentation
Description
The command refers to the GSM/UMTS supplementary service CLIP (Calling Line Identification
Presentation) that enables a called subscriber to get the calling line identity (CLI) of the calling
party when receiving a mobile terminated call.
Write command enables or disables the presentation of the CLI at the TE. It has no effect on the
execution of the supplementary service CLIP in the network.
When the presentation of the CLI at the TE is enabled (and calling subscriber allows), +CLIP:
,,,[,[][,]] response is returned after every RING (or
+CRING: ; refer sub clause "Cellular result codes +CRC") result code sent from TA to TE. It
is manufacturer specific if this response is used when normal voice call is answered.
SIM PIN References
YES 3GPP TS 27.007
Syntax
Test Command
AT+CLIP=?
Read Command
AT+CLIP?
Responses
+CLIP: (list of supported s)
OK
Responses
+CLIP: ,
OK
ERROR
+CME ERROR:
Write Command
AT+CLIP=
Execution Command
AT+CLIP
Responses
OK
ERROR
+CME ERROR:
Responses
Set default value(=0,=0):
OK
SIM5215_SIM5216_AT Command Manual_V1.13 133
1/13/2011