AT Commands Set

SIM5215_SIM5216 AT Command Manual
Description
The command is used to set the rotation degree of camera.
SIM PIN
NO
References
Vendor
Syntax
Write Command
AT+CCAMSETR=
Responses
OK
If camera in a wrong state:
CAMERA INVALID STATE
ERROR
If camera not starting:
CAMERA NOT START
ERROR
Defined values
0 – not rotate .
90 – rotate 90 degrees clockwise.
180 – rotate 180 degrees clockwise.
270 – rotate 270 degrees clockwise.
Examples
AT+CCAMSETR=90
OK
7.6 AT+CCAMSETN Set camera night shot mode
Description
The command is used to set night shot mode of camera.
SIM PIN
NO
References
Vendor
Syntax
Write Command
AT+CCAMSETN=
Responses
OK
If camera in a wrong state:
SIM5215_SIM5216_AT Command Manual_V1.13 109
1/13/2011