AT Commands Set

SIM5215_SIM5216 AT Command Manual
Defined values
,
RLP version number in integer format, and it can be 0, 1 or 2; when version indication is not
present it shall equal 1.
IWF to MS window size.
MS to IWF window size.
Acknowledgement timer.
Retransmission attempts.
Re-sequencing period in integer format.
NOTE and are in units of 10 ms.
Examples
AT+CRLP?
+CRLP:61,61,48,6,0
+CRLP:61,61,48,6,1
+CRLP:240,240,52,6,2
OK
4.15 AT+CR Service reporting control
Description
Write command controls whether or not intermediate result code “+CR: ” is returned from
the TA to the TE. If enabled, the intermediate result code is transmitted at the point during connect
negotiation at which the TA has determined which speed and quality of service will be used, before
any error control or data compression reports are transmitted, and before the intermediate result
code CONNECT is transmitted.
SIM PIN References
YES 3GPP TS 27.007
Syntax
Test Command
AT+CR=?
Read Command
Responses
+CR: (list of supported s)
OK
Responses
SIM5215_SIM5216_AT Command Manual_V1.13 44
1/13/2011